Panasonic KX-TDA100 Features Manual page 53

Hybrid ip-pbx
Hide thumbs Also See for KX-TDA100:
Table of Contents

Advertisement

2.
Busy on Busy
The Busy on Busy feature works when the destination for the Intercept Routing—Overflow
in an Incoming Call Distribution Group feature is not assigned in one of the following
conditions:
a)
b)
[Example of a)]
When the answering agent number (
queuing call number (
There are five assistants in the shop. If two of them are engaged on the phone, the next
caller will hear a busy tone to prevent the caller from thinking that there is no one in the
shop or that the shop is closed.
Conditions
[Intercept Routing—Overflow in an Incoming Call Distribution Group]
If the Overflow time expires, and the overflow destination is unavailable:
a)
If the trunk call arrives through the LCOT or T1 (LCOT/GCOT) card: (1) The line is
disconnected when the call was once in a queue and an outgoing message (OGM)
was sent to the call, or when the call reached an incoming call distribution group by
using the DISA feature (
for the above, redirection is ignored and the Overflow timer activates again.
b)
If the call arrives through the other cards: Redirection is ignored and the Overflow
timer activates again.
[Busy on Busy]
If a trunk call arrives through the LCOT or T1 (LCOT/GCOT) card, a busy tone will not be
sent to the caller.
Feature Guide References
1.2.2.3 Queuing Feature
There is no space in the Waiting queue.
The Queuing Time Table is not assigned and there are no extensions logged-in.
Queuing Call Capacity [628]) is "0":
Maximum Number of Agents [632]) is "2", and the
1.16.6 Direct Inward System Access (DISA)). (2) Except
1.2 Receiving Group Features
Feature Guide
53

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Kx-tda15Kx-tda200Kx-tda30

Table of Contents