Calling Line Identification (Cli) Distribution - Panasonic KX-TDA100 Features Manual

1.1.1.5

Calling Line Identification (CLI) Distribution

Description
Directs an incoming trunk call to a destination when the caller's identification number (e.g.,
Caller ID) matches the number in the System Speed Dialling Table which is used as the Caller
ID Table. Each Caller ID number (telephone number for each System Speed Dialling number)
can have its own destination.
Caller ID (KX-TDA30/KX-
TDA100/KX-TDA200 only)
Calling Line Identification
Presentation (CLIP)
Automatic Number
Identification (ANI) (KX-
TDA100/KX-TDA200 only)
CLI always works in conjunction with the following call distribution methods:
a)
DIL
b)
DID/DDI
c)
MSN Ringing Service
Each trunk (for DIL) and the DID/DDI/MSN number can enable or disable the CLI feature for
each time mode (day/lunch/break/night) (
When the call has its Caller ID and the CLI is enabled for the time mode, the call will be handled
by the CLI method.
[Programming Example of System Speed Dialling Table for CLI]
Location
(System Speed
Dialling No.)
CLI Feature
Telephone No.
000 901234567890
001
:
Description
Caller's number is sent from an analogue
trunk.
Caller's number is sent from an ISDN line. • 1.20.1.2
Caller's number is sent from an E1 or T1
line.
2.2.4 Time Service).
System Speed
*1
Dialling Name
ABC Company
: :
: :
1.1 Incoming Call Features
Details in
• 1.17.1 Caller
ID
Calling/
Connected
Line
Identification
Presentation
(CLIP/COLP)
• 1.21.1 E1
Line Service
(KX-TDA100/
KX-TDA200
only)
• 1.22.1 T1
Line Service
(KX-TDA100/
KX-TDA200
only)
CLI Destination
*2
200
:
:
Feature Guide 27