Entering System Programming Mode; Programming Structure - Panasonic KX-TDA100 Features Manual

Entering System Programming Mode

System programming enables the extension user to set the time, call destination and all sorts
of system conditions within the limits of available programming. The administrator or manager
can also set up desired parameters for user programming. It is necessary to enter the relevant
password to start programming. Programming has two levels: Administrator Level and User
Level.
Administrator Level:
All system programming available for PT programming is accessible.
PROGRAM/
PAUSE
User Level:
Permitted system programming is accessible. Each access to system programming can be
controlled.
PROGRAM/
PAUSE
Note
means default value throughout this manual.

Programming Structure

Programming
Number
[0XX]
[1XX]
[2XX]
[3XX]
[4XX]
[5XX]
[6XX]
[7XX]
[8XX]
[9XX]
System Password for Administrator
#
—for PT Programming
System Password for User
—for PT Programming
Programming Group Title
Basic Programming
System Programming
Time Programming
TRS/Barring/ARS
Programming
Trunk Programming
COS Programming
Extension Programming
Resource/Interface
Programming
SMDR & Maintenance
Programming
Card Programming
= 1234
= 1234
Description
Frequently used programming steps.
Global system parameters.
Flexible system timers.
TRS/Barring and Automatic Route
Selection (ARS).
Setting of trunk, trunk group, or BRI line
features.
Class of Service parameters.
Assignment of the extension features
Assignment of the various interfaces on
the PBX.
Setting of SMDR and maintenance
features.
The programming used to refer to or delete
the card.
3.3 PT Programming
Programming No.
3 digits
Programming No.
3 digits
Feature Guide 325