Automatic Route Selection (Ars) Features; Automatic Route Selection (Ars) - Panasonic KX-TDA100 Features Manual

1.9

Automatic Route Selection (ARS) Features

1.9.1

Automatic Route Selection (ARS)

Description
ARS automatically selects the carrier available at the time an outgoing trunk call is made
according to preprogrammed settings. The dialled number will be checked and modified to
connect the appropriate carrier.
[Carrier Selection Procedure Flowchart]
The numbers
pages.
Is the ARS mode (
Is the dialled number found in the
Leading Number Exception Table (
Is the dialled number found in the
Leading Number Table (
Checks the Routing Plan Table (
to determine which carrier to use.
Is the carrier (
appropriate time block (
Modifies the dialled number by
removing the digits (
following the modify commands (
Sends the modified number
to the trunk.
X in the flowchart correspond to the [Programming Procedures] on the following
A trunk call is made.
) enabled?
1
Yes
2
No
)?
3
Yes
) found in the
6
)?
5
Yes
Is there an available
trunk group ( )?
11
Yes
9 ) and
12
1.9 Automatic Route Selection (ARS) Features
No (Normal Trunk Access)
Yes
)?
No
)
4
No
No
Because all
trunks are busy?
Yes
).
Sends a
busy tone.
Sends the telephone
number to the user-
selected carrier.
No
Yes
(default)
Is normal
Trunk Access
allowed?
No
Sends the
Sends a telephone number
by the Idle Line
reorder tone.
Access.
Feature Guide 113