Panasonic KX-TDA100 Features Manual page 161

2.
Service Features
Features
Calling Line
Identification (CLI)
Distribution
Incoming Call Log
3.
Number/Name Assignment
3.1 Automatic Caller ID Number Modification
This PBX automatically modifies the incoming caller's number according to
preprogrammed tables. The modified number will be recorded for calling back.
The PBX supports a number of modification tables, and each trunk group can select
a table for use. Each table has ten locations for local/international calls and one for
long distance calls.
The PBX checks the local/international call data first. If a match is not found, the long
distance call data is applied.
[Example]
<Table Selection>
Trunk Modification
Group No.
1
2
:
Note
When caller's information is sent through an ISDN line and the call type is Subscriber,
National, or International, the following modification table is used instead of the above
table:
<Modification Table>
Subscriber Call Data
National Call Data
International Call Data
Directs a DIL/DID/DDI/MSN call to a CLI
destination if the caller's identification (Caller
ID/CLIP/ANI) has been assigned to the Caller
ID Table.
Caller's information is automatically recorded
in the call log of the called extension. This
information is used for confirming the caller,
calling the caller back, and/or storing the
number and name in the Personal Speed
Dialling.
<Modification Table>
Table
1
Modification Table 1
3
:
Local/International
Call Data 1
Local/International
Call Data 2
:
Local/International
Call Data 10
Long Distance Call
Data 1
Removed No. of Digits Added No.
0
0
0
Description
Area Code Removed No. of Digits Added No.
012
00
:
Not
programmable
Blank
0
00
1.17 Caller ID Features
Details in
• 1.1.1.5 Calling
Line
Identification
(CLI)
Distribution
• 1.17.2
Incoming Call
Log
3 Blank
2 001
:
:
0
0
Feature Guide 161