Note
Any extension user (except extension users allowed to change the mode) can only
check the current status on the display by pressing the Time Service button.
Conditions
•
PT programming (
of the following:
– Day-1 (Day Start time)
– Lunch (Lunch Start time)
– Day-2 (Lunch End time)
– Night (Night Start time)
PC programming can also set the following three time periods for break mode per day.
– Break-1 Start
– Break-1 End (Day restart)
– Break-2 Start
– Break-2 End (Day restart)
– Break-3 Start
– Break-3 End (Day restart)
•
Time Service Switching Mode (Automatic/Manual) Button
A flexible button can be customised as the Time Service Switching Mode (Automatic/
Manual) button.
Feature Guide References
1.8.1 Toll Restriction (TRS)/Call Barring (Barring)
1.19.2 Flexible Buttons
2.2.3 Tenant Service
User Manual References
User Manual
1.7.10 Checking the Time Service Status
2.1.2 Time Service Mode Control
Time Service Starting Time [102]) can set the Start and/or End time
2.2 System Configuration—Software
Feature Guide
293