Intercept Routing - Panasonic KX-TDA100 Features Manual

1.1.1.6

Intercept Routing

Description
Provides automatic redirection of incoming trunk calls. There are two types of Intercept Routing
as follows:
Feature
Intercept Routing—No
Answer (IRNA)
Intercept Routing—
Busy/DND
The available intercept destination is as follows:
Type 1: The destination assigned on the extension port which the original destination joins.
Type 2: The destination assigned on the trunk group which receives the call.
Original Destination
Wired Extension (PT/SLT/ISDN
Extension/T1-OPX)
PS
Incoming Call Distribution Group
PS Ring Group
VM Group (DTMF/DPT)
External Pager (TAFAS)
DISA
Analogue/ISDN Remote
Maintenance
Idle Line Access no. + Phone no.
Trunk Group Access no. +
Trunk Group no. + Phone no.
Other PBX Extension (TIE with no
PBX Code)
Other PBX Extension (TIE with PBX
Code)
If a called party does not answer a call within a preprogrammed
time period (Intercept time) (
redirected to the preprogrammed destination.
If a called party is busy or in DND mode, the call is redirected to
the preprogrammed destination.
( Extension Intercept Destination [604])
( Trunk Group Intercept Destination [470])
Description
Intercept Time [203]), it is
The Available Intercept Destination
Type 1
Type 1
Intercept Routing—Overflow in an Incoming Call
Distribution Group works (
Feature). The overflow destination is assigned on
the incoming call distribution group which the
original destination joins (
Overflow Time Expiration [625]).
Type 2
Type 2
Type 2
Type 2*
Not available
Not available
Not available
Not available
Not available
1.1 Incoming Call Features
1.2.2.5 Overflow
Destination for
Feature Guide 29