Panasonic KX-TDA100 Features Manual page 25

[Programming Example of MSN Table for ISDN BRI Port 1]
A table can be programmed for each ISDN-BRI port. Each BRI port has 10 MSN locations.
Locat
MSN
ion
123-
01
4567
123-
02
2468
: :
10 :
Note
Tenant number and VPS trunk group number can also be assigned in the MSN table.
Tenant number is used to determine the time mode (day/lunch/break/night) for the
corresponding MSN. VPS trunk group number is used in Voice Mail DPT (Digital)
Integration (
Explanation:
If the MSN "123-4567" is received from BRI port 1:
1. Checks the number in the table.
Matches the number in location 01.
2. Checks the time mode.
In Day mode: CLI is enabled. Route to CLI destination.
In Lunch mode: CLI is disabled. Route to MSN destination, extension 100.
Conditions
• To use this feature, the MSN service must be assigned for a trunk port as the distribution
method (
• MSN Modification
It is possible to modify a received MSN to make it shorter, which may be convenient when
programming the MSN table. Modification method (removed number of digits/added
number) can be programmed on a trunk port basis.
[Modification Example]
Removed number of digits: 6
Added number: 10
Received MSN: 87654321
• When using point-to-multipoint configuration with a BRI, do not connect another ISDN
terminal device in parallel with the PBX. As only two channels can be used at one time
with the BRI, the other ISDN terminal device may monopolise both channels.
Feature Guide References
1.1.1.5 Calling Line Identification (CLI) Distribution
MSN
Name
Day Lunch Break Night
A Disabl
Enable
Company
C Disabl
Enable
Company
: :
: :
1.23.3 Voice Mail DPT (Digital) Integration).
BRI DIL/DDI/MSN Selection [421]).
CLI
Disabl
Enable
e e
Disabl Disabl
e e e
: : :
: : :
Modified MSN: 876543 21 = 1021
1) Remove the first
6 digits.
1.1 Incoming Call Features
MSN Destination
Day Lunch Break Night
101 100 101
102 100 102
: : :
: : :
2) Add "10".
Feature Guide
100
100
:
:
25