Panasonic KX-TDA100 Features Manual page 59

FWD for
Incoming Call
Distribution
Group
[Button Status—FWD/DND Button]
The FWD/DND button shows the current status as follows:
Light Pattern
Red on
Slow red flashing
Off
The functions assigned to the "on" and "flashing" patterns can be changed through system
programming.
[Button Status—Group FWD Button]
The Group FWD button shows the current status as follows:
Light Pattern
Red on
Off
[Mode Change]
When either the FWD or DND feature is assigned, pressing the FWD/DND button changes
the on/off setting alternately. When both the features are assigned simultaneously,
pressing the button changes the settings as follows:
FWD DND
Note
Pressing the FWD/DND button (fixed button) in idle status will produce one of the
following results, selected through system programming:
When in FWD/DND Setting Mode:
Pressing the button will enter personal programming mode for the FWD/DND setting.
When in FWD/DND Cycle Switch Mode:
Pressing the button will cycle the settings as shown above in [Mode Change].
A FWD/DND button customised on a flexible button is always in FWD/DND Cycle
Switch mode, and the mode cannot be changed.
• When intercom calls are set to be handled differently from trunk calls (forwarding type,
forward destination, DND on/off), we recommend establishing buttons for both FWD/
DND—Internal and FWD/DND—External, and/or Group FWD—Internal and Group
FWD—External, because:
a)
the light patterns of the FWD/DND—Both button (including FWD/DND button [fixed
button]) and the Group FWD—Both button will indicate the setting for either trunk calls
1.3 Call Forwarding (FWD)/Do Not Disturb (DND) Features
Type
Group FWD—Internal
Group FWD—External
Group FWD—Both
Status (default)
FWD on
DND on
FWD/DND off
Status (default)
FWD on
FWD off
Off
Description
Works for incoming intercom calls
Works for incoming trunk calls
Works for all incoming calls
Feature Guide 59