Pt Programming - Panasonic KX-TDA100 Features Manual

2.3 System Data Control
2.3.2

PT Programming

Description
A PT user can perform the following programming:
a)
Personal Programming: Customising the extension according to his needs.
b)
System Programming: Customising the PBX according to organisational needs.
c)
Manager Programming: Customising specified frequently changing items (e.g.,
Charge Management and Remote Extension Lock).
Conditions
• COS programming determines what programming can be performed (
Mode Limitation [516]):
– System programming and personal programming
– Personal programming only
– No programming
• The extension which is connected to the lowest numbered extension port can perform both
personal programming and system programming regardless of the COS.
• The extension(s) assigned as the manager COS can perform manager programming.
• During programming, the PT is considered to be busy.
• Access to system programming and manager programming is allowed only one at a time.
However, one PBX supports up to 16 simultaneous programmers (one system
programmer + 15 personal programmers, one manager programmer + 15 personal
programmers, or 16 personal programmers).
• System Programming Password Level
To access system programming, a valid password must be entered. There are two types
of passwords, which are set at the factory, and can be changed through system
programming.
System Password
for Administrator—
for PT Programming
System Password
for User—for PT
Programming
• Personal Programming Data Default Set
A user can return all of the items programmed on the telephone to default.
Feature Guide References
2.2.6 Manager Features
3.3 PT Programming
300 Feature Guide
Type
All system programming available for PT programming is
accessible (
Programming [110]).
Permitted system programming is accessible (
Password for User—for PT Programming [111]). Each access to
system programming can be controlled.
Description
System Password for Administrator—for PT
Programming
System