Panasonic KX-TDA100 Features Manual page 202

1.21 E1 Line Service Features (KX-TDA100/KX-TDA200 only)
[Explanation]
Number in
the table
Conditions
• If an E1 line is used as a trunk, the channel type depends on the contract with the
telephone company.
• If "MFC-R2" is selected as the Dial Mode, the PBX always sends a dial tone, instead of the
telephone company, when making a trunk call using E1 line.
202 Feature Guide
Feature
(1) TIE Line Service Refer to the TIE Line Service feature. (
(2) Direct Inward
Dialling (DID)
(3) Direct In Line
(DIL)
(4) Automatic
Number
Identification
(ANI)
(5) Call Charge
Information
Service)
Refer to the DID feature. (
(DID)/Direct Dialling In (DDI))
Refer to the DIL feature. (
Outgoing ANI:
Sends the caller's number to the E1 line. The sending
method is the same as ISDN CLIP service. (
Calling/Connected Line Identification Presentation (CLIP/
COLP))
Incoming ANI:
Receives the caller's number from the E1 line.
When the ANI number is received, it can be treated the
same as a Caller ID number. (
The call charge meter pulses can be received during a
conversation. ( 1.25.2 Charge Meter)
Description
1.28.1 TIE Line
1.1.1.3 Direct Inward Dialling
1.1.1.2 Direct In Line (DIL))
1.17.1 Caller ID)
1.20.1.2