Ping Command - Canon IR 2420 Network Manual

NOTE
If you want to change the entry mode, press
<Entry Mode> ➞ press [OK]. You can select <Aa>(Alphabet) or <12>(Number). For
more information, see Chapter 2, "Basic Operations," in the Reference Guide.
● If you want to use a host name to check the connection to the IPv6
network:

PING Command

IPv6 Address
Host Name
Host Name
_
Set
Entry Mode: Aa
NOTE
If you want to change the entry mode, press
<Entry Mode> ➞ press [OK]. You can select <Aa>(Alphabet) or <12>(Number). For
more information, see Chapter 2, "Basic Operations," in the Reference Guide.
7
Press (Reset) to return to the Standby display.
(Tone), or use [ ] or [ ] to select
❑
Use [ ] or [ ] to select <Host Name> ➞
press [OK].
❑
Enter the host name using
(numeric keys) ➞ use [ ] or [ ] to select
<Set> ➞ press [OK].
The result of the PING command is displayed
on the LCD display.
If the connection fails, check the settings
described in "Interface Settings," on p. 2-2,
and "Setting IPv6 Address," on p. 2-16.
(Tone), or use [ ] or [ ] to select
Specifying IP Addresses
2
-
2-35