Canon IR 2420 Network Manual page 83

❑
● If you want to specify IPv6 settings:
❑
3
❑
6
Specify the DNS Settings.
● If you specify the DNS Settings for an IPv4 network:
❑
❑
❑
3-16
Setting Up the Machine Using a Web Browser (Remote UI)
Specify the [IP Address], [Subnet Mask], and [Gateway Address] settings.
In [IP Address], enter the machine IP address. In [Subnet Mask] and [Gateway
Address], enter the subnet mask and gateway address used by the TCP/IP
network.
NOTE
If DHCP, BOOTP, or RARP is used on the network, some of the above items are not
used. The values obtained from DHCP, BOOTP, or RARP will be used.
Specify the settings under [IPv6 Settings]. If you want to use an IPv6 network, place
a check for [Use IPv6].
NOTE
If you enable IPv6, a link local address is automatically set.
Specify the use of Stateless Address, Manual Address, and DHCPv6.
NOTE
For details about each settings, see "Setting IPv6 Address," on p. 2-16.
Enter the IP address of the primary DNS server and the secondary DNS server in
[Primary DNS Server Address] and [Secondary DNS Server Address].
Specify the [Host Name] and [Domain Name] settings.
In [Host Name], enter the host name of the machine.
Example) sales_printer
In [Domain Name], enter the domain name of the machine.
Example) sales_dpt.xyz_company.co.jp
To use the DNS dynamic update function, place a check for [Use DNS Dynamic
Update].
NOTE
•
The DNS dynamic update function automatically registers to the DNS server the
names specified in [Host Name] and [Domain Name] for the machine IP address.
•
When using this function, specify the DNS Settings in the above step.
•
You can use this function in an environment with a DNS server that can perform
dynamic registration (dynamic DNS server).
•
If using LPR to specify [Host Name] and [Domain Name], you can use the machine
without specifying the IP address of the machine.