Canon IR 2420 Network Manual page 48

● If you are setting up the machine for an IPv6 network:
DNS Dynamic Update
Off
On
Settings
IMPORTANT
•
The DNS dynamic update function enables the machine to register the IP address,
host name, and domain name of the machine to the DNS server automatically. This
function requires that a dynamic DNS server be available in the network.
•
Windows 2000 Server and Windows Server 2003 do not support DHCPv6 servers.
•
To use the DNS dynamic update function, enter the IP address of a DNS server, the
host name, and domain name of this machine.
DNS Settings
DNS Server Settings
DNS Host/Domain
DNS Dynamic Update
DNS Dynamic Update
Off
On
Settings
DNS Dynamic Update
Reg. Manual Address
Register Stateful
❑
Use [ ] or [ ] to select <On> ➞ press
[OK].
If you do not want to use the DNS Dynamic
Update function, select <Off> ➞ proceed to
step 14.
❑
Use [ ] or [ ] to select
<DNS Dynamic Update> ➞ press [OK].
❑
Use [ ] or [ ] to select <Settings> ➞
press [OK].
❑
Use [ ] or [ ] to select
<Reg. Manual Address> ➞ press [OK].
Specifying IP Addresses
2
2-31