Canon IR 2420 Network Manual page 39

14
Select whether or not to use DHCPv6.
● If you want to use DHCPv6 to obtain a stateful address from a DHCP
server:
Use DHCPv6
2
● If you do not want to use DHCPv6 to obtain a stateful address from a
DHCP server:
Use DHCPv6
15
Press
16
Restart the machine.
Turn OFF the machine, wait at least 10 seconds, and then turn it ON.
NOTE
For instructions on how to turn the machine ON and OFF, see Chapter 1, "Before You
Start Using This Machine," in the Reference Guide.
The IPv6 settings are complete.
2-22
Specifying IP Addresses
Off
On
Off
On
(Reset) to return to the Standby display.
❑
Use [ ] or [ ] to select <On> ➞ press
[OK].
❑
Use [ ] or [ ] to select <Off> ➞ press
[OK].