Checking The Network Connection - Canon IR 2420 Network Manual

Checking the Network Connection

After specifying IP addresses, make sure that the network connections are properly
set.
IMPORTANT
•
When you connect the machine to a switching hub, the machine may not be able to
connect to the network even if the network settings are correctly set. This problem may
be resolved by delaying the startup of network communications for the machine. (See
"Startup Time Settings," on p. 3-9.)
•
If you set the startup time of the machine's network function, execute the PING command
after the time set as the startup time passes. (See "Startup Time Settings," on p. 3-9.)
1
Press
<System Settings> ➞ press [OK].
For help, see the screen shots in steps 1 and 2 in "Ethernet Driver," on p. 2-2.
2
System Settings
Device Info Settings
Dept. ID Management
User ID Management
Network Settings
3
Network Settings
TCP/IP Settings
SNMP Settings
Ethernet Driver
Startup Time Set.
4
TCP/IP Settings
IPv4 Settings
IPv6 Settings
WINS Configuration
LPD Print Settings
(Additional Functions) ➞ use [
] or [ ] to select
Use [ ] or [ ] to select
<Network Settings> ➞ press [OK].
Use [ ] or [ ] to select
<TCP/IP Settings> ➞ press [OK].
Use [ ] or [ ] to select
<IPv4 Settings> or
<IPv6 Settings> ➞ press [OK].
Specifying IP Addresses
2
2-33