Canon IR 2420 Network Manual page 49

Reg. Manual Address
DNS Dynamic Update
2
Reg. Stateful Address
14
Press
15
Restart the machine.
Turn OFF the machine, wait at least 10 seconds, and then turn it ON.
NOTE
For instructions on how to turn the machine ON and OFF, see Chapter 1, "Before You
Start Using This Machine," in the Reference Guide.
The DNS settings are complete.
2-32
Specifying IP Addresses
Off
On
Reg. Manual Address
Register Stateful
Off
On
(Reset) to return to the Standby display.
❑
If you want to register a manual address in
the DNS server using dynamic DNS
updating, use [ ] or [ ] to select <On> ➞
press [OK]. Otherwise, select <Off> ➞
press [OK] ➞ proceed to step 14.
❑
Use [ ] or [ ] to select
<Register Stateful> ➞ press [OK].
❑
If you want to register a stateful address in
the DNS server using dynamic DNS
updating, use [ ] or [ ] to select <On> ➞
press [OK]. Otherwise, select <Off> ➞
press [OK].