Canon IR 2420 Network Manual page 51

5
IPv4 Settings
6
Enter the IP address of a device on the network that you want to
2
connect the machine to.
● If you are connecting to the IPv4 network:
PING Command
● If you want to use an IPv6 address to check the connection to the IPv6
network:
PING Command
IPv6 Address
0000:0000:0000:0000
2-34
Specifying IP Addresses
IP Address Settings
PING Command
IP Address Range
DNS Settings
000.000.000.000
IPv6 Address
Host Name
Set
Entry Mode: Aa
Use [ ] or [ ] to select
<PING Command> ➞ press [OK].
❑
Enter an existing IPv4 address on the
network using -
use [ ] or [ ] to select <Set> ➞ press
[OK].
The result of the PING command is displayed
on the LCD display.
If the connection fails, check the settings
described in "Interface Settings," on p. 2-2,
and "Setting IPv4 Address," on p. 2-12.
❑
Use [ ] or [ ] to select <IPv6 Address>
➞ press [OK].
❑
Enter an existing IPv6 address on the
network using -
use [ ] or [ ] to select <Set> ➞ press
[OK].
The result of the PING command is displayed
on the LCD display.
If the connection fails, check the settings
described in "Interface Settings," on p. 2-2,
and "Setting IPv6 Address," on p. 2-16.
(numeric keys) ➞
(numeric keys) ➞