Canon IR 2420 Network Manual page 34

IMPORTANT
You cannot use the functions of IPv6 without using the functions of IPv4.
NOTE
Once the IP address is set from the control panel, you can check and change it from the
Remote UI. (See "Setting Up the Machine Using a Web Browser (Remote UI)," on
p. 3-11.)
1
(Additional Functions) ➞ use [
Press
<System Settings> ➞ press [OK].
For help, see the screen shots in steps 1 and 2 in "Ethernet Driver," on p. 2-2.
2
System Settings
Device Info Settings
Dept. ID Management
User ID Management
Network Settings
3
Network Settings
TCP/IP Settings
SNMP Settings
Ethernet Driver
Startup Time Set.
4
TCP/IP Settings
IPv4 Settings
IPv6 Settings
WINS Configuration
LPD Print Settings
] or [ ] to select
Use [ ] or [ ] to select
<Network Settings> ➞ press [OK].
Use [ ] or [ ] to select
<TCP/IP Settings> ➞ press [OK].
Use [ ] or [ ] to select
<IPv6 Settings> ➞ press [OK].
Specifying IP Addresses
2
2-17