Canon IR 2420 Network Manual page 16

Protocol Settings (See Chapter 3, "Setting Up the Machine for Your Network
5
Environment.")
Specify the machine's protocol settings. Use any of the following software to specify the settings on the
computer:
•
The Machine's control panel (Additional Functions menu)
•
The Remote UI (via a web browser)
•
NetSpot Device Installer (Canon utility software)
Computer Settings for Printing (See Chapter 4, "Setting up a Computer for
6
Printing.")
Specify the settings for each computer you use for Printing.
IMPORTANT
•
It is recommended that the network administrator perform steps 1 and 2.
•
If you are printing from a computer over a TCP/IP network, you can use the following
print applications:
- LPD
- Raw (Windows 2000/XP/Vista/7/Server 2003/Server 2008 only)
•
Use the control panel of the machine or NetSpot Device Installer if you are configuring
the protocol settings for the first time. After configuring the protocol settings, you can
change the content by using the Remote UI.
TCP/IP Network Setup Operating Procedures
1
1-5