IPv6 Address
0000:0000:0000:0000
Prefix Length
2
● If you want to specify a range of IPv6 addresses to accept or reject:
First Address
0000:0000:0000:0000
NOTE
If you want to change the entry mode, press
<Entry Mode> ➞ press [OK]. You can select <Aa>(Alphabet) or <12>(Number). For
more information, see Chapter 2, "Basic Operations," in the Reference Guide.
2-44
Access Control
Set
Entry Mode: Aa
64
(0-128)
IMPORTANT
•
A total of four (ranges of) IPv6 addresses or IPv6 address prefixes can be set for
this function.
•
You cannot specify a multicast address for an IPv6 address.
•
If you enter '0' in [Prefix Length], access from all IPv6 addresses is restricted.
•
If you enter '128' in [Prefix Length], the IPv6 addresses of the machine are not
permitted.
Set
Entry Mode: Aa
❑
Enter the desired prefix address using
(numeric keys) ➞ use [ ] or [ ] to
-
select <Set> ➞ press [OK].
❑
Enter the prefix length using [ ] or [ ], or
(numeric keys) ➞ press [OK].
-
The prefix length can be set between 0
and 128.
To enter another IP address or change
the settings of the registered IP
addresses, repeat steps 9 to 11.
❑
Enter the first IP address (at which the
range begins) using
keys) ➞ use [ ] or [ ] to select <Set> ➞
press [OK].
(Tone), or use [ ] or [ ] to select
-
(numeric