Canon IR 2420 Network Manual page 20

3
System Settings
Device Info Settings
Dept. ID Management
User ID Management
Network Settings
4
Network Settings
TCP/IP Settings
SNMP Settings
Ethernet Driver
Startup Time Set.
5
Ethernet Driver
MAC Address
00-00-00-00-00-00
Auto Detect
6
Select whether or not to use the Automatic Detect function.
● If you want the machine to automatically determine the communication
mode (Half duplex/Full duplex) and Ethernet type (10 Base-T/
100 Base-TX):
Auto Detect
Off
On
Settings
Use [ ] or [ ] to select
<Network Settings> ➞ press [OK].
Use [ ] or [ ] to select
<Ethernet Driver> ➞ press [OK].
Press [OK] to select
<Auto Detect>.
❑
Use [ ] or [ ] to select <On> ➞ press
[OK].
❑
Proceed to step 7.
Interface Settings
2
2-3