Reset; Help Link - HP WL520 User Manual

reset

reset
reset reset
Figure 3-16 Figure 3-16 Figure 3-16 Figure 3-16 Command Screens - Reset Command Screens - Reset Command Screens - Reset Command Screens - Reset
Use the tab to restore the WL520 to factory default conditions. The WL520 may also be reset from the
Reset Reset Reset Reset
indicator side of the unit. Since this will reset the current WL520 IP Address, a new IP Address must be assigned. Also refer to
Recovery Procedures.

help link

help link
help link help link
Figure 3-17 Figure 3-17 Command Screens - Help Link Command Screens - Help Link
Figure 3-17 Figure 3-17 Command Screens - Help Link Command Screens - Help Link
To open , click the
Help Help Help Help
Help Help Help Help
During initialization, the WL520 on-line help files are downloaded to the default location:
C:\Program Files\WL520_AP\AP\Help\.
If you want to place these files on a shared drive, copy the Help Folder to the new location, and then specify the new path in
the Help Link box.
button on any display screen.
Issuing System Commands
RESET RESET RESET RESET
button on
3-11