Wireless Interface Security Parameters; Primary And Backup Radius Server Table Parameters - HP WL520 User Manual

Hide thumbs Also See for WL520:
Table of Contents

Advertisement

wireless interface security parameters

wireless interface security parameters
wireless interface security parameters
wireless interface security parameters
The following table details the WEP encryption parameters for the WL520. This information applies to both the 802.11a and
the 802.11b wireless interfaces.
name
name
name
name
Wireless Interfaces Security
Encryption Status
Index
Encryption Key 1
Encryption Key 2
Encryption Key 3
Encryption Key 4
Deny non-encrypted Data
Data Transmission Encryption
Key
security encryption key length table
security encryption key length table
security encryption key length table
security encryption key length table
The following table details how to set the Encryption Key Length for the wireless interfaces.
name
name
name
name
Security Encryption Key Length
Table
Index
Encryption Key Length
NOTE:
The available Encryption Key Lengths vary based on card type. Depending on the model, 802.11b cards support 64
(also referred to as 40) bits or 128 (also referred to as 104) bits. 802.11a cards support 64 (also referred to as 40),
128 (also referred to as 104), or 152 (also referred to as 128) bits.

primary and backup radius server table parameters

primary and backup radius server table parameters
primary and backup radius server table parameters
primary and backup radius server table parameters
hp WL520 AP devices that use RADIUS authentication and/or accounting support both primary and backup RADIUS servers.
The configuration parameters and statistics are the same for both primary and backup servers. The CLI differentiates the
primary and backup RADIUS parameters by using the table index.
general radius parameters
general radius parameters
general radius parameters
general radius parameters
name
name
name
name
RADIUS
MAC Access Control Status
Authorization Lifetime
MAC Address Format
RADIUS Accounting Status
Accounting Inactivity Timer
type
type
type
type
values
values
values
values
Group
Integer
enable
disable
Integer
3 = WL110 PC Card A
4 = WL110 PC Card B
DisplayString
User Defined
DisplayString
User Defined
DisplayString
User Defined
DisplayString
User Defined
Integer
enable (default)
disable
Integer
1 (default)
2
3
4
type
type
type
type
values
values
values
values
Table
N/A
Integer
3 = WL110 PC Card A
4 = WL110 PC Card B
Integer
64 bit
128 bit
152 bit
type
type
type
type
values
values
values
values
Group
N/A
Integer
enable
disable (disable)
Integer32
60 – 43200 seconds
(in 60 sec increments)
900 sec. (default)
Integer
dashdelimited (default)
colondelimited
singledashdelimited
no delimiter
Integer
enable
disable
Integer32
0 – 2147483647 minutes;
default is 5 min.
Parameter Tables
access
access
access
access
cli parameter
cli parameter
cli parameter
cli parameter
R
wifsec
RW
encryptstatus
N/A
N/A
W
encryptkey1
W
encryptkey2
W
encryptkey3
W
encryptkey4
RW
encryptdeny
RW
encryptkeytx
access
access
access
access
cli parameter
cli parameter
cli parameter
cli parameter
R
secenckeylentbl
N/A
index
RW
enckeylen
access
access
access
access
cli parameter
cli parameter
cli parameter
cli parameter
r
radius
r
radmacacctrl
rw
radauthlifetm
rw
radmacaddrformat
rw
radaccstatus
rw
radaccinactivetmr
6-29

Advertisement

Table of Contents
loading

Table of Contents