Table of Contents
Advertisement
management interface
management interface
management interface
management interface
Once you have a valid WL520 IP Address and an Ethernet connection, you may use your web browser to issue commands
and monitor network statistics.
The Command Line Interface (CLI) also provides a method for issuing commands and viewing network statistics using Telnet
and Terminal clients. This section covers only use of the HTTP Interface. For more information about issuing commands and
viewing network statistics with the CLI, refer to
1
2
Figure 3-1
Figure 3-1
Figure 3-1
Figure 3-1
Login to HTTP Interface
Login to HTTP Interface
Login to HTTP Interface
Login to HTTP Interface
1. Open your browser and enter the IP Address in the address bar. Press the
appears.
NOTE:
Leave the
User Name
User Name
User Name
User Name
2. Enter your password in the
3. Each section of the
System Status
–
. This area provides system level information, including the WL520 IP Address and contact information.
System Status
System Status
System Status
System Status
–
. System traps (if any) appear in this area. Each trap identifies a specific severity level.
System Traps
System Traps
System Traps
System Traps
Using the Command Line
field empty.
field (default is "public").
Password
Password
Password
Password
screen provides the following information.
Management Interface
Interface.
key. Result: The WL520
ENTER
ENTER
ENTER
ENTER
screen
Login
3-2
Advertisement
Table of Contents
