Cli Monitoring Parameters - HP WL520 User Manual

cli monitoring parameters

cli monitoring parameters
cli monitoring parameters cli monitoring parameters
Using the "show" command with the following table parameters will display operating statistics for the WL520 (these are the
same statistics that are described in
– staticmp. Displays the ICMP Statistics. staticmp.
staticmp. staticmp.
– statarptbl. Displays the IP ARP Table Statistics. statarptbl. statarptbl. statarptbl.
– statbridgetbl. Displays the Learn Table. statbridgetbl.
statbridgetbl. statbridgetbl.
– statiapp. Displays the IAPP Statistics. statiapp. statiapp. statiapp.
– statradius. Displays the RADIUS Authentication Statistics. statradius.
statradius. statradius.
– statif. statif. Displays information and statistics about the Ethernet and wireless interfaces. statif. statif.
– stat802.11. Displays additional statistics for the wireless interfaces. stat802.11.
stat802.11. stat802.11.
– statethernet. statethernet. Displays additional statistics for the Ethernet interface. statethernet. statethernet.
Monitoring Network Statistics for the HTTP Web interface).
Parameter Tables
6-39