Upload; Reboot - HP WL520 User Manual

upload

upload
upload upload
Figure 3-14 Figure 3-14 Command Screens - Upload Command Screens - Upload
Figure 3-14 Figure 3-14 Command Screens - Upload Command Screens - Upload
Use the tab to upload Configuration files from the WL520. The TFTP server must be running, and configured to point to
Upload Upload Upload Upload
the directory that is to contain the uploaded file. We suggest you assign the file a meaningful name, which may include version
or location information.
If you don't have a TFTP server installed on your system, install the TFTP server from the CD. Select the "Xtras/SolarWinds"
sub-directory, double-click "OEM-TFTP-Server.exe", and follow the directions given to complete the installation.
– . Enter the TFTP server IP Address.
Server IP Address Server IP Address Server IP Address Server IP Address
Double-click on the TFTP server icon on your desktop and locate the IP address assigned to the TFTP server. Note: This is
the IP address that will be used to point the Access Point to the AP Image file.
– . Enter the name of the file to be uploaded.
File Name File Name
File Name File Name
Copy the updated AP Image file to the shared TFTP server folder. The default AP Image is located at C:/Program Files/
WL520_AP/AP/.
– . Select
File Type File Type Config Config
File Type File Type Config Config
– . Select
File Operation File Operation File Operation File Operation Upload Upload Upload Upload

reboot

reboot reboot reboot
Figure 3-15 Figure 3-15 Command Screens - Reboot Command Screens - Reboot
Figure 3-15 Figure 3-15 Command Screens - Reboot Command Screens - Reboot
Use the tab to save configuration changes (if any) and reset the WL520. Entering a value of 0 (zero) seconds causes an
Reboot Reboot Reboot Reboot
immediate reboot. Note that
.
.
, covered below, does not save configuration changes.
Reset Reset Reset Reset
Issuing System Commands
3-10