Ip Access Table Parameters; Snmp Table Host Table Parameters; Telnet Parameters; Serial Port Parameters - HP WL520 User Manual

ip access table parameters

ip access table parameters ip access table parameters ip access table parameters
When creating table entries, you may either specify the argument name followed by argument value or simply entering the
argument value. When only the argument value is specified, then enter the values in the order depicted by the following table.
CLI applies default values to the omitted arguments. Due to the nature of the information, the only argument that can be
omitted is the "comment" argument.
name name
name name
IP Access Table
Table Index
IP Address
IP Mask
Comment (optional)
Status (optional)

snmp table host table parameters

snmp table host table parameters snmp table host table parameters snmp table host table parameters
When creating table entries, you may either specifying the argument name followed by argument value. CLI applies default
values to the omitted arguments. Due to the nature of the information, the only argument that can be omitted is the "comment"
argument.
name name
name name
SNMP Trap Host Table
Table Index
IP Address
Password
Comment (optional)
Status (optional)

telnet parameters

telnet parameters telnet parameters telnet parameters
name name name name
Telnet
Telnet Management Interface
Bitmask
Telnet Port
Telnet Login Inactivity Time-out
Telnet Session Idle Time-out

serial port parameters

serial port parameters serial port parameters serial port parameters
name name name name
Serial
Baud Rate
Data Bits
Parity
Stop Bits
Flow Control
type type values values
type type values values
Table N/A
Integer User Defined
IpAddress User Defined
IpAddress User Defined
DisplayString User Defined
Integer enable
disable
delete
type type values values
type type values values
Table N/A
Integer User Defined
IpAddress User Defined
DisplayString User Defined
DisplayString User Defined
Integer enable
disable
delete
type type type type values values values values
Group N/A
Interface Bitmask 0 - no interfaces (disable)
1 - Ethernet
4 - Wireless A
8- Wireless B
15 - all interfaces
Integer User Defined
23 (default)
Integer 1 – 60 seconds
30 sec (default)
Integer 1 - 900 seconds
900 sec (default)
type type type type values values values values
Group N/A
Integer 2400, 4800,
9600 (default),
19200, 38400, 57600
Integer 8
Integer none
Integer 1
Value none (default)
xon/xoff
Parameter Tables
access access cli parameter cli parameter
access access cli parameter cli parameter
R mgmtipaccesstbl
N/A index
RW ipaddr
RW ipmask
RW cmt
RW status
access access cli parameter cli parameter
access access cli parameter cli parameter
R snmptraphosttbl
N/A index
RW ipaddr
W passwd
RW cmt
RW status
access access access access cli parameter cli parameter cli parameter cli parameter
R telnet
RW telifbitmask
RW telport
RW tellogintout
RW telsessiontout
access access access access cli parameter cli parameter cli parameter cli parameter
R serial
RW serbaudrate
R serdatabits
R serparity
R serstopbits
RW serflowctrl
6-32