Replacing The Batteries - AEMC SL261 User Manual

5.3
If the green battery indication LED does not light up when the probe is
turned on, the batteries will need to be replaced.
Do not replace the battery while probe is in use.
To replace the battery:
• Disconnect the probe from the circuit and the oscilloscope.
• Turn the probe "OFF".
• Unscrew the battery compartment screw and pull out the battery
compartment cover.
• Replace the battery and put the cover back on.
AC/DC Current Oscilloscope Probe Model SL261
Shop for Power Metering products online at:

Replacing the Batteries

CAUTION: Risk of electric shock. Disconnect all input(s) from the unit or
remove the probe from any conductor before opening the battery cover to
change the batteries.
www.
PowerMeterStore
15
1.888.610.7664
.com