Step 5: Running The Data Collection Test - Scantronic iNSIGHT 20 Plus Operator's Manual

Chapter 3: Installation
Getting Ready to Scan
68
If you get an error message, contact Scantron
NOTE:
Customer Support as described in "Requesting
Support" on page 153.
d.
click OK to complete scanner configuration.

Step 5: Running the Data Collection Test

Perform this step only if your scanner came
IMPORTANT:
bundled with ScanTools Plus data collection software.
You can run only one of the following programs at a
NOTE:
time because they use the same driver:
• iNSIGHT Scanner Utilities
• Click&Scan
• ScanTools Plus
In this section you will use ScanTools Plus software to
perform data collection.
1.
Open ScanTools Plus from your operating system.
The ScanTools Plus window opens.
i
Scantron NSIGHT 20 Plus Scanner