Connecting The Usb Cable - Scantronic iNSIGHT 20 Plus Operator's Manual

Chapter 3: Installation
Installing the iNSIGHT Scanner Utilities Software
52
3.
Plug the power cord output lead (attached to the
power supply) into the power port on the back of the
scanner.
4.
Plug the power cord input lead (attached to the power
supply) into the wall outlet.

Connecting the USB Cable

If you have not installed the iNSIGHT
CAUTION:
Scanner Utilities software, do that now before
proceeding.
i
Scantron NSIGHT 20 Plus Scanner