Scantronic iNSIGHT 20 Plus Operator's Manual page 136

Operator's Guide
4.
Grasp the pre-separation pad and pull it out of the
separation module.
5.
Discard the worn pre-separation pad.
6.
Align the side tabs of a new pre-separation pad with
the slots on the separation module.
7.
Push the pre-separation pad firmly in the slots until
the pre-separation pad flap rests lightly against the
separation module tires.
8.
Reinstall the separation module by aligning the tabs
with the slots and snapping it into position.
Chapter 5: Maintenance
Replacing the Pre-Separation Pad
123