Starting And Stopping The Scanner - Scantronic iNSIGHT 20 Plus Operator's Manual

Starting and Stopping the Scanner

Operator's Guide
Before you start scanning, make sure the scanner is on and
ready for operation, which is indicated by the green
indicator light being on and constant.
Scanning is controlled by software developed for your
application. To start and stop scanning, refer to the
documentation provided with your application software.
Be sure that the documents in the input tray are cen-
NOTE:
tered in the tray and in the path of the paper present
sensor.
Chapter 2: Scanner Basics

Starting and Stopping the Scanner

33