Step 3: Installing Scantools Plus Software; Step 4: Configuring The Scanner - Scantronic iNSIGHT 20 Plus Operator's Manual

Chapter 3: Installation
Getting Ready to Scan
66
5.
Place a two sided color document in the input tray,
and then click the Start Scanning icon (see the
graphic on page 64).
The scanner scans the document. If both sides of the
document display properly in the viewer, the scanner
is ready for document imaging use. If you get an error,
contact Scantron Customer Support as described in
"Requesting Support" on page 153.

Step 3: Installing ScanTools Plus Software

Perform this step only if your scanner came
IMPORTANT:
bundled with ScanTools Plus data collection software.
You must have the iNSIGHT Scanner Utilities
CAUTION:
installed before installing ScanTools Plus.
Next, install ScanTools Plus data collection software. See
Chapter 2 of the ScanTools Plus Installation Guide (included
with your iNSIGHT 20/20 Plus scanner) for instructions
on how to install the software.

Step 4: Configuring the Scanner

Perform this step only if your scanner came
IMPORTANT:
bundled with ScanTools Plus data collection software.
You must have the ScanTools Plus software
CAUTION:
installed before you can configure the scanner.
i
Scantron NSIGHT 20 Plus Scanner