Scantronic iNSIGHT 20 Plus Operator's Manual page 145

Chapter 5: Maintenance
Replacing the Feed Module Tires
132
5.
Replace the core assembly in the feed module. You
may need to slide the shaft to the right or left so the
core fits properly within the feed module housing.
6.
Repeat the replacement procedure outlined above for
the other core assembly.
7.
Using a vacuum or emulsiclean wipe, remove dust and
debris from the feed module area.
8.
Insert the feed module by aligning the pins and
pushing it toward the left to fit it into position. Be sure
the gears are aligned and it snaps into place.
9.
Reinstall the feed module cover by aligning the tabs in
the slots and pushing the feed module cover down
until it snaps into place.
i
Scantron NSIGHT 20 Plus Scanner