Scantronic iNSIGHT 20 Plus Operator's Manual page 100

Operator'sGuide
From the Click&Scan Icon.
1.
Click the Click&Scan icon to display the function
listing.
2.
Select the function number you want to run.
From the Buttons on the Front of the Scanner
1.
Select the number for the function you want to run
using the scroll (top) button on the scanner. The
number of the function is displayed in the function
window.
The numbers correspond to the Click&Scan
NOTE:
icon function numbers (see above).
Chapter 4: Document Imaging Basics
Click&Scan
87