Operator'sGuide
6.
Select One from the Images per side: drop-down list.
7.
Click Done to return to the image settings window.
8.
Select Front from the Side drop-down list.
9.
On the General tab, select Color (24-bit) from the
Scan as: drop-down list.
10.
Adjust any other front side settings on the rest of the
tabs in the image settings window.
11.
Select Back from the Side drop-down list.
12.
On the General tab, select Black and White (1-bit)
from the Scan as: drop-down list.
13.
Adjust any other back side settings on the rest of the
tabs in the image settings window.
14.
When you are finished, click Home to return to the
Main Scanner window then click Save to save your
selections to the shortcut.
Chapter 4: Document Imaging Basics
The Main Scanner Window
99