Installing The Insight Scanner Utilities Software - Scantronic iNSIGHT 20 Plus Operator's Manual

Installing the iNSIGHT Scanner Utilities Software

Operator's Guide
Install the software before connecting the
CAUTION:
scanner to the PC.
NOTE: The iNSIGHT Scanner Utilities software supports
only one scanner connected to the host computer at a
time.
The iNSIGHT Scanner Utilities installation program
installs the following software:
• Click&Scan: A software program that allows you to
perform document imaging tasks with just a few clicks
of your mouse. For more information about
Click&Scan, see Chapter 4, "Document Imaging
Basics".
• Calibration Utility: A software program that is used
during setup to calibrate the scanner for data
collection. After setup, this program should not be
used unless the scanner has been moved to a different
computer, the scanner has been exchanged for a new
one, or you are directed to do so by Scantron
Customer Support.
• Scanner Exerciser: A software utility program that
Customer Support uses to test the data collection
capabilities of the scanner.
Some of the software mentioned above requires
NOTE:
the Microsoft .Net Framework. The installation
routine also installs the .Net Framework if it is not
already installed.
Chapter 3: Installation

Installing the iNSIGHT Scanner Utilities Software

47