System Settings - Honeywell Thor vm3 User Manual

System Settings

Use this screen to configure WWAN settings.
Enable Logging
Check to enable logging. Specify the maximum file size and the location for the log file.
By default logging is disabled.
TcpWindow Size=128k
Check to set the TCP window size to 128k.
By default this options is disabled.
Enable On-screen Connection Icon
Check to enable an on-screen connection icon. The icon is displayed in the lower right corner of the screen, above the
date/time.
Connected
This icon is in addition to the connection icon in the system tray.
By default the on-screen icon is disabled.
Enable Firmware Update
The WWAN card supports firmware update over the air (Firmware Over The Air, or FOTA). By default, FOTA is dis-
abled. See Using FOTA
Restore Defaults
Use this option to return all Connection Manager settings to the default value.
7 - 46
Not connected
(page 7-47)