Honeywell Thor vm3 User Manual page 200

7. Select the trusted root certificate from the listed certificates.
8. Select the User Credentials tab.
9. Select the desired credentials method of providing username and password. Prompt automatically for user-
name and password is recommended.
10. If saved username and password is selected, enter the credentials now.
11. Tap OK to close any open windows.
12. From the profile listing, make sure the desired profile is active.
13. If prompt for username and password option was selected, enter the credentials when prompted.
Note: If the credentials are not entered when to window first pops up, the credentials window can become hidden
behind other windows.
14. Verify the connection using Status (page 7-2).
7 - 26