Gps - Honeywell Thor vm3 User Manual

Configure the Thor VM3
Repeat these steps for each Thor VM3 that will be using FOTA. Once configured, the Thor VM3 continues to
check for firmware updates at the specified interval.
On the System Settings tab of the Connection Manager:
1. Check the Enable Firmware Update checkbox.
2. Select the desired frequency (daily or weekly) to Check for Updates.
3. Specify the Firmware Storage Path. This path includes the address of the web server but does not include
the carrier number or version folders created. The carrier folder and update folder are automatically detected
by the update utility. For example, if the web server is hosted at http://127.0.0.1, the path is entered as
http://127.0.0.1/wwan/
Important - the trailing / must be included after wwan.

GPS

This screen displays GPS data. A WWAN connection is not required for the GPS data, however an antenna must be
attached to the GPS port.
Tap the Start button to begin receiving GPS data. Once started, the button label changes to Stop and GPS data on screen
is populated.
Tap the Clear GPS Data button to erase the GPS data.
7 - 49