Shutting The System Down; Performing Shutdown From Disk - Honeywell X-Superteam XPS-100 System Operation Manual

c'
SHU'M'ING THE SYSTEM DOWN
Description
To shut the system down means to end
all
current activities.
It
is
the only way to inlonn the system that the work has finished. Once
this phase
is
completed, the user can only reinitialize the system.
Performing Shutdown From Disk
. The "shutdown" command shuts down the system correctly. To use
this command, the console workstation must be in the root directory and
the system must be in "multi-user" mode. Once you have verified these
conditions, enter the following commaoos:
, cd
I
, shutdown 0
positions the workstation in the
root directory
starts the shutdown procedure
If the shutdown command
is
entered when the console workstation
was not positioned
in
the root directory, the following message appears:
shUtdowDl you must
be in
the root directory
(J)
to use. shutdown .
Messages
1. SHUTDOWN PROGRAM do
.you want
to
send your
own message
T(y or
n)
2. Type your message
followed by
<ctrD d_
Replles
. 4
Indicates the beginni~ of the
shutdown procedure.By replying
y, a message
is
sent to
all
active tenninals. What happens
if you reply n, is explained in
the note below.
The system asks you to
enter the message and at
the end press ctrl and d
sim ultaneously.