Registry - Honeywell Thor vm3 User Manual

Registry

Start > Settings > Control Panel > Registry
Choose options for managing the registry and rebooting the Thor VM3.
Button Action
Load User Defaults When clicked, a standard load file dialog is opened, to allow the user to pick a Registry Save (.RSG)
file. The applet then copies the specified User registry file to the Active registry. The user is asked
to verify a reboot, and then the applet does a warmboot to activate the new registry.
Note: When the Thor VM3 is set to user defaults, a second reboot must be performed to load the
Save User Defaults When clicked, a standard Save File dialog is opened, to allow the user to name the Registry Save
(.RSG) file. The applet then copies the Active registry to the specified User registry file and reboots
the device.
Load Registry De- The applet copies the Factory Default registry from the OS to the Active registry (by deleting the cur-
faults rent registry). The user is asked to verify a reboot, and then the applet performs a restart to activate
the factory default registry. If a user password has been set, the applet warns the user that the pass-
word will be erased, and asks them to enter it before the reboot is allowed.
Note: When the Thor VM3 is reset to factory defaults, a second reboot must be performed to load
Restart When clicked, the OS performs a registry save, and then a restart. OS and CAB files are reloaded.
WLAN driver. When the Thor VM3 has finished booting, return to the Registry panel and tap
Restart,
the WLAN driver. When the Thor VM3 has finished booting, return to the Registry panel and
tap Restart,
5 - 55