Keyboard Remapper - Honeywell Thor vm3 User Manual

Keyboard Remapper

Start > Settings > Control Panel > Keyboard Remapper
Keyboard Remapper for
integrated Programmable Keys
Keyboard Remapper is designed to remap keys on the integrated keypad (P1 thought P7) or keys on an attached USB key-
board (such as the Honeywell 21-key numeric keyboard).
If programming both the integrated programmable keys and keys on a USB keyboard, follow the process below.
1. If a USB keyboard has already been attached, remove the USB keyboard to program the integrated keys.
2. Start the remapping utility.
3. Program the integrated programmable keys (i.e.: P1 - P7) on the Thor VM3.
4. Exit the remapping utility.
5. Attach the USB keyboard.
6. Restart the remapping utility.
7. Remap any keys desired on the USB keyboard.
If any modifications need to be made to the P1 - P7 keys at a later time, it is necessary to remove any USB keyboard
to edit these keys in the remapping utility.
To remap a key:
1. Select the desired key to remap from the Physical Key pull-down list.
2. Select the desired modifier key, for example:
• Normal (no modifier), Orange or Blue for the integrated programmable keys (P1-P7)
• Normal (no modifier), Yellow or Green for the 21-key numeric keyboard.
3. Select the desired value for the remapped key from the Key Value pull-down list.
4. Tap Add Key Definition.
5. The value for the remapped key shows in the box below.
6. To return any key to the default value, select Key Default Value from the Key Value list.
7. Changes are saved when the remapping utility is exited.
Abort
Tap the Abort button to exit without saving changes.
Keyboard Remapper for
21-key Numeric Keyboard
5 - 35