Honeywell Thor vm3 User Manual page 127

HTML5 Browser
Core Messaging Service
Server IP
Broadcast Name
Port
Keep Alive Ping Interval
SmartSystem information
Identity
Administrator
Location
Information
Device Manager
Device Health Controls
Disabled Executables
Device Wipe
Virtual Wedge
Enable Virtual Wedge
Virtual Wedge Method
Barcode Scanner Wedge
License Manager
About
License Vault
Bar Code Scanners and Enterprise Settings
The following types of bar code scanners are supported on the Thor VM3:
• A tethered scanner connected to COM1 or COM2
• A wireless scanner connected via Bluetooth
Note: USB scanners are not supported by or configured through Enterprise Settings. See
The scanner symbologies can be updated through Enterprise data collection software.
Serial Scanners
To configure a particular scanner to work with Enterprise data collection software, select Start > Control Panel >
Enterprise Settings > Data Collection > Tethered Scanner > Tethered Scanner (COM1) or (COM2) > Scan-
ner Settings.
Program Version
General
Security
Privacy
Appearance
Parameters
Server IP (read-only)
Broadcast Name
Port (read-only)
Keep alive ping interval
Parameters
Identity information (hardware version, firmware version, OS version, etc.)
(read-only)
Administrator settings (name, phone, and email)
Location settings (country, state, city, campus, and detail)
Device Notes (read-only
Parameters
• Enable Data Health Collection
• Enable Blue Light (LED)
• Set Rule File Location
• Set Data Refresh periods
Disabled Executables Template
• Enable Wipe
• Interval (in days)
Parameters
Enable virtual wedge
• Adapt to Application (default)
• Character mode
• Block mode
• Barcode Scanner Grid
• Label Encoding (Code Page)
Parameters
Information on License Vault
None (displays applications that are licensed)
USB Scanners (page 5-30).
5 - 29