Honeywell Thor vm3 User Manual page 203

CCKM
To save changes, tap Apply the button. Confirmation dialogs may be displayed.
To exit without saving changes, tap the X in the upper right of the window.
Tap restore default values, tap the Restore Default Values then tap Apply.
Radio
Power Save Set the power save level. Options are Off (default) and Auto-PSM.
Note: Power save level is reset to the default (Off) after reboot.
Band Selection Select the bands to use. Options are: A, BG, G, ABG (default).
DataRate Selec- To limit data rates, check the Limit DataRate checkbox. If checked, select the desired rate
tion
(MCS0 to MCS15). MCS0 (Modulation and Coding Scheme) 0 is slowest, MCS15 is fastest but
subject to more errors. Default is disabled.
Note: DataRate selection is reset to default (Disabled) after reboot.
Diversity Selection By default, diversity is on.
Use CCKM (Cisco Centralized Key Management) for faster roaming. Default is en-
abled.
7 - 29