Setup Terminal Emulation Parameters; Cleaning; Cleaning The Thor Vm3 And The Dock; Cleaning The Touch Screen - Honeywell Thor vm3 User Manual

Setup Terminal Emulation Parameters

The Thor VM3 offers both RFTerm and Enterprise TE. For details on configuring these terminal emulators, refer to the appropri-
ate user's guide at www.honeywellaidc.com.

Cleaning

Cleaning the Thor VM3 and the Dock

Dampen a cloth with the cleaner and then wipe the surface. Do not spray the cleaner directly onto the Thor VM3 or the
dock. Avoid harsh chemicals. The following cleaners are recommended:
®
• Windex Glass Cleaner
®
• Formula 409 All-Purpose Cleaner or Glass and Surface Cleaner
®
• Fantastik All Purpose Cleaner
• Liquid hand soap

Cleaning the Touch Screen

Note: These instructions are for components made of glass. If there is a removable protective film sheet on the display,
remove the film sheet before cleaning the screen.
Keep rough or sharp objects away from the Thor VM3 touch screen and, if installed, the bar code reader scanning aperture.
If the glass becomes soiled or smudged, clean only with a standard household cleaner such as Windex
use isopropyl alcohol. Dampen the cloth with the cleaner and then wipe the surface.
Do not use paper towels or harsh-chemical-based cleaning fluids since they may result in damage to the glass surface. Use
a clean, damp, lint-free cloth.
Do not scrub optical surfaces. If possible, clean only those areas which are soiled. Lint and particulates can be removed
with clean, filtered canned air.

Startup Help

Contact Technical Assistance
Thor VM3 seems to lockup as soon
as it is rebooted.
(page 10-1) if you need more help.
There may be slight delays while the wireless client connects to the network, authoriza-
tion for voice-enabled applications complete, and Bluetooth relationships establish or re-
establish.
When an application begins, the Thor VM3 is ready for use.
®
without vinegar or
2 - 11