Top View - Enhanced Dock - Honeywell Thor vm3 User Manual

Enhanced Dock
Accessory
Mount
Fuse
Power Switch
Power
Connector
Note: For the VMX Enhanced Dock: COM1 is used for screen blanking (via the power cable connector) and is
unavailable when the screen blanking box is attached. When a screen blanking box is attached, any external
serial device such as a scanner, must be connected to the COM2 port on the dock. If a screen blanking box is
not connected via the power cable, the COM1 port on the dock is available for a serial device

Top View - Enhanced Dock

Only the Enhanced Dock has these connectors on the top. The connectors are located behind water tight plugs.
USB Host
Strain Relief
Clamps
Ethernet
RAM
Ball
Accessory
Mount
CANbus
/ Audio
COM2
COM1
USB1
2 - 7