Screen Control - Honeywell Thor vm3 User Manual

Screen Control

Start > Settings > Control Panel > Screen Control
Set screen properties for the Thor VM3.
Factory Default Settings
Current Level
LCD Brightness (%)
Ambient Light (%)
Automatic Brightness Control
Automatic brightness control is only available on a Thor
VM3 with an outdoor display.
Enable automatic brightness
control
Low to medium light level (%) 25
Medium to high light level (%) 75
Note: If Automatic Brightness Control is enabled for an outdoor display, the value for LCD Brightness depends on the
Ambient Light %. Otherwise, the display defaults to 100% brightness.
Note: There is no default value for Ambient Light % as it varies depending on the level of light where the Thor VM3 is
located. If the Thor VM3 has an indoor display it does not have an ambient light sensor and the Ambient Light % is
always 0.
Note: Touch screen defroster controls are located on the
Current Level
LCD brightness displays the current LCD brightness level. The default brightness is 100%.
100 (see note)
(see note)
Disabled
Peripherals (page 5-48) control panel.
5 - 57