Home - Honeywell Thor vm3 User Manual

Home

The Home tab lists the available connections and information on these connections. The order of the connections listed are
specified on the Link Settings tab.
Each configured connection (or link) is identified by name, either WLAN (for a WLAN connection) or the name of the carrier
(for a WWAN connection). If a connection is not configured, there is no name after the link and the status field is empty.
The active connection displays the IP address and signal strength (RSSI). Inactive connections show the status as
Standby.
If a WWAN connection is active, the roaming status (Home or Roam) is displayed.
7 - 42